General
| Manufacturer | VERMEER |
| Model | CC155 Concrete Cutter |
| Year | |
| Category | |
| Subcategory | Concrete Cutters, Trenchers, Plows, Rockwheels |
General Dimensions and Weights
| Weight | 26600lbs (12065.6kg) |
| Length | 165in (419.1cm) |
| Height | 120in (304.8cm) |
| Width | 96in (243.8cm) |
| Wheel Base (Centerline of Axles) | 97in (246.4cm) |
| Ground Clearance | 5in (12.7cm) |
| Tread Width | 79in (200.7cm) |
| Water Tank Capacity | 200gal (757.1L) |
| Weight (Tanks Empty) | 24800lbs (11249.1kg) |
Engine
| Make and Model | John Deere 4045 |
| Gross Horsepower | 156hp (116.3kw) |
| Fuel Tank Capacity | 88gal (333.1L) |
| Operating Range | 10.5 hours |
| Number of Cylinders | 4 |
| Cooling Medium | Liquid |
| Air Cleaner | Dry type exhaust aspirated |
| Electrical System | 24 volt DC |
Auxiliary Hydraulic System
| Oil Tank Capacity | 74gal (280.1L) |
| Oil Type | Vermeer HyPower 68 or Vermeer HyPower 100 |
Ground Drive
| Ground Drive Motors | Dual-path hydrostatic with dual series flow to four low speed high torque motors |
| Travel Speed | 461ft/min (461m) |
| System Pressure | 5000psi (344.7bar) |
| Brakes (Park) | Spring-applied, hydraulic release |
| Tire size | 32.3 x 16.5 - 12 |
| Transport Speed Maximum (High) | 971ft/min (296m/min) |
Steering
| Type | Hydraulic Automotive |
| Steering Ratio | 4 turns lock to lock |
| Turning Radius | 216in (548.6cm) |
Cutter Wheel
| Wheel Diameter | 84in (213.4cm) |
| Cutting Width | 4.8in (12.1cm) |
| Cutting Width - Option Two | 5in (12.7cm) |
| Cutting Width - Option Three | 6.5in (16.5cm) |
| Cutting Width - Option Four | 9in (22.9cm) |
| Cutting Width - Option Five | 10in (25.4cm) |
| Maximum Cutting Depth | 31 " (78.74 cm) |
| Cutting Teeth Type | Free-rotating, carbide tipped |
| Cutter Wheel Drive | Hydrostatic, one pump, one low speed high torque motor |
| Rock Cutter Segments | Bolt-on replaceable x 10 |
| Wheel Thickness | 2in (5.1cm) |
| Rock Cutter Teeth Quantity 5 " (12.7 cm) Cut | 110 |
| Rock Cutter Teeth Quantity 6.5 " (16.51 cm) Cut | 130 |
| Rock Cutter Teeth Quantity 9 " (22.86 cm) Cut | 150 |
| Rock Cutter Teeth Quantity 10 " (25.4 cm) Cut | 110 |
Cutter Wheel Drive
| Cutter Tip Speed (Low Gear) | 1056ft/min (321.9m/min) |
| Cutter Tip Speed (High Gear) | 2113ft/min (644m/min) |
Options
| Foam Filled Tires | Standard |
| Asphalt Mill | 30" (76.2 cm) wide x 13" (33 cm) deep or 30" wide (76.2 cm) x 20" (50.8 cm) deep |